Loose Tube

  • UK Made
  • Man
    Leader Optec

    4-24 Fibre - Our pre-terminated Loose Tube assemblies are robust with excellent water-resistant properties and ideal for outdoors and ducts. Fitted with ruggedised tails and gland for use within panels or direct patching. Suited to campus links where outdoor to indoor transition is required.

    Request a Quote

    Loose Tube


    So that we can provide you with an accurate quote, please complete the fields below or call us on +44(0)1745 586600

    Fibre Mode 
    Fibre Count 

    For Fibre Counts greater than 24, please visit our High Fibre Count page under Pre-Terminated Assemblies.

    Connector End A 

    Please note that if you require 16F or higher in an S-Line breakout, then Uniboot Connectors must be selected. Please refer to our Breakout Options document under downloads.

    Connector End B 

    Please note that if you require 16F or higher in an S-Line breakout, then Uniboot Connectors must be selected. Please refer to our Breakout Options document under downloads.

    *If Uniboot, please select which style (End A):
    *If Uniboot, please select which style (End B):
    End A Tail Style 
    End A Tail Length

    Please note that the standard tail length will vary depending on the fibre count you have selected. See Tail Length Guide under downloads.

    End A Stagger Length
    End A Non-Staggered Tail Length
    End B Tail Style 
    End B Tail Length
    End B Stagger Length
    End B Non-Staggered Tail Length
    Protection Type End A (Non-Staggered)
    Protection Type End B (Non-Staggered)

    If there are any other information/specifications that you would like to add, please do so here

    Preferred method of contact: 
    50%
    Specifications
    Fibre Mode:

    Single-mode, OM1, OM2, OM3, OM4, OM5.

    Fibre Count:

    4, 8, 12, 16, 24.

    Higher fibre counts available upon request. Find out more.

    Connector Options:

    LC, SC, ST, FC, E2000, MU. Uniboot: LC, MDC, SN & CS. Polish: UPC & APC.

    Cable Length:

    Standard length measurement is from breakout to breakout.

    Key Features
    • Slim, water resistant cable.
    • Ruggedised tails.
    • E-Glass filler.
    • CPR - Eca to B2ca.
    • UK manufacture.
    Benefits
    • Best suited to outdoor & ducts.
    • Suitable for panels or direct patching.
    • Good level of rodent protection.
    • Can be used internally.
    • Custom made & fast turnaround.
    Cable Construction
    • Central loose tube.
    • Gel filled or dry tube options.
    • Multiple 250µm fibres.
    • E-glass protection.
    • 6-6.5mm jacket LSZH.
    • PE, PUR & Mil-Tac jackets available.
    • CPR - Eca, Dca, Cca, B2ca.
    Breakout Styles
    • S-Line 14mm diameter with 12x 2mm tails.
    • M-Line 28mm diameter with 24x 2mm tails.
    • Tail lengths from 0.3m to 2.5m.
    • Tails contain one or two fibres.
    • Staggered tails to fit protection tube.
    • Simplex connectors for one fibre tail.
    • Uniboot options for two fibre tails.
    Protection Options

    Non-Staggered tails:

    • Braided sleeve with pulling eye – 50N tensile force.
    • PVC Sleeve with pulling eye – 30N tensile force.

    Staggered tails:

    • Braided sleeve with pulling eye – 50N tensile force.
    • PVC sleeve with pulling eye – 30N tensile force.
    • Clear protection tube (28mm widest point) – 400N tensile force, 400N/100²mm crush.
    • Reinforced protection tube (35mm widest point) – 400N tensile force, 1000N/100²mm crush.
    Applications
    • LANs.
    • Data Centres.
    • Telecommunications networks.
    • Campus links.
    • FTTA networks.
    Downloads

    Need some help?

    Send us a message or contact our team on +44(0)1745 586600 and we will be happy to talk through your requirements.

    You might also like...

    View all products

    Tight Buffered

    4-24 Fibre - Our pre-terminated Tight Buffered assemblies are connectorised directly onto 900µm tails. For use within patch panels or closures and best suited to indoor horizontal & vertical LANs with some outdoor use due to its LSZH jacket.

    Find out more about Tight Buffered
    • UK Made

    CST Armoured

    4-24 Fibre - Our pre-terminated Corrugated Steel Tape assemblies are designed to provide a high level of protection against rodent, water and crush damage. Best suited to a permanent, fixed installation in harsh environments or direct burial. Often referred to as CST and STA.

    Find out more about CST Armoured
    • UK Made

    SWA Armoured

    4-24 Fibre - Our pre-terminated Steel Wire Armoured assemblies provide the highest protection against rodents, weathering, crush and tensile damage. Best suited to permanent installs such as direct burial, industrial or warehousing applications with harsh environment exposure.

    Find out more about SWA Armoured
    • UK Made

    Compare Loose Tube

    This Product

    Typical Application
    Outdoor; e.g. Underground Installation or Aerial Deployment
    Jacket Material
    PE, LSZH
    Armour
    None
    Crush Resistance
    Medium

    Tight Buffered

    Typical Application
    Indoor; e.g. LAN Networks, Data Centres and Office Buildings
    Jacket Material
    LSZH
    Armour
    None
    Crush Resistance
    Low
    Find out moreabout Tight Buffered

    CST Armoured

    Typical Application
    Harsh Environments; e.g. Industrial Settings or Outdoor applications
    Jacket Material
    PE, LSZH
    Armour
    Corrugated Steel Tape
    Crush Resistance
    High
    Find out moreabout CST Armoured

    SWA Armoured

    Typical Application
    Harsh Environment; e.g. Industrial settings, Outdoor applications and Direct Burial
    Jacket Material
    PE, LSZH
    Armour
    Steel Wire Armour
    Crush Resistance
    High
    Find out moreabout SWA Armoured

    Accreditations

    Sign up to the Leader Optec E-News

    * required field
    Marketing Permissions

    Please select how you would like to hear from us:

    You can unsubscribe at any time by clicking the link in the footer of our emails. For information about our privacy practices, please visit our website.

    As a GDPR compliant company, we would like to explain why you have received this email. We believe your company has a legitimate need for our company updates and information. For more information relating to B2B email marketing permissions please refer to the ICO's guidance relating to the PECR B2B email marketing. Please refer to clause 142-145.

    We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices.